PartType

image
Name

1x2 Tubeless

BLId

PartFamily
DecoratedPartTypes View itemsMoldMembers View itemsMold Generations View itemsMolds View itemsColors View items

Photo Generation Molds PipStyle BottomStyle InsideLogoOrientation InsideLogoStyle InsideRibStyle MoldIdentificationLayout PatPendLayout PatPendStyle StudLogoStyle StudRecessStyle MoldPositionLayout MoldPositionStyle
thumb 04 - Dogbone 1 Centered Narrow Bottom Edge None None None None None None None None None None None
thumb 05 - Tubeless - Logo inside 1 Centered Wide Bottom Edge None Left To Right Blockletters Mixed None None None Wide Straight 'O' None None None
thumb 06 - Full stud - with stud logo 7 Centered Narrow Bottom Edge None None None Spotted None None None Wide Straight 'O' None Center (Top To Bottom) Typed
thumb 11 - Tubeless - No logo inside - corner pip 6 Single Cornered Narrow Bottom Edge None None None Across None None None Wide Straight 'O' Large sloped (3mm) None None
thumb 12 - Tubeless - No logo inside - wide center pip 4 Centered Wide Bottom Edge None None None Across None None None Wide Straight 'O' Large sloped (3mm) Left (Bottom To Top) Typed
21 - Old logo - 3mm stud recess - corner-pip 5 Single Cornered Narrow Bottom Edge None None None None None None None Wide Straight 'O' Large (3mm) Center (Top To Bottom) Typed
23 - Old logo - smaller stud recess - corner-pip - no mold-id 10 Single Cornered Narrow Bottom Edge Tubes Without Cross-support None None None None None None Wide Straight 'O' Small (2-2,2mm) None None
31 - Old logo - 1x2 with mold identifiers 6 Single Cornered Narrow Bottom Edge None None None None Center None None Wide Round 'O' Small (2-2,2mm) Center (Top To Bottom) Typed

04 - Dogbone (1954-1954)

Photo CatId Mold Members Associations
thumb 04i 1x2 Mystery Bricks #1 1 / 3

05 - Tubeless - Logo inside (1955-1956)

Photo CatId Mold Members Associations
thumb 05h Small blockletter - No slotted bricks 2 / 9

06 - Full stud - with stud logo (1955-1956)

Photo CatId Mold Members MoldPositionLayout MoldPositionStyle Associations
thumb 06e 1x2 no slots - pip long side - no dots 8 / 8 Center (Top To Bottom) Typed
thumb 06f 1x2 no slots - pip long side - one dot 8 / 8 Center (Top To Bottom) Typed
thumb 06g 1x2 no slots - pip long side - two dots below 8 / 8 Center (Top To Bottom) Typed
thumb 06h 1x2 no slots - pip long side - two dots right 8 / 8 Center (Top To Bottom) Typed
thumb 06i 1x2 mixed - pip short side - weak rib 4 / 14 Center (Top To Bottom) Typed
thumb 06j 1x2 mixed - pip short side - full rib 4 / 14 Center (Top To Bottom) Typed 06k (Slot removed)
thumb 06k 1x2 no slots - pip short side 1 / 1 None None 06j (Slot removed)

11 - Tubeless - No logo inside - corner pip (1956-1957)

Photo CatId Mold Members MoldPositionLayout MoldPositionStyle StudRecessStyle Associations
thumb 11c Unnumbered - sloped stud recesses 3 / 22 None None Large sloped (3mm)
thumb 11q 1x2 Sloped stud-recesses 28 / 28 Center (Bottom To Top) Typed Large sloped (3mm) 11r (Matching surface pattern),11s (Matching surface pattern)
thumb 11r 1x2 Sloped+Normal stud-recess 28 / 28 Center (Bottom To Top) Typed Large sloped (3mm) 11q (Matching surface pattern),11s (Matching surface pattern)
thumb 11s 1x2 Normal stud-recess 28 / 28 Center (Bottom To Top) Typed Large (3mm) 11q (Matching surface pattern),11r (Matching surface pattern)
thumb 11t 1x2 Sloped stud-recesses sideways numbers 28 / 28 Center (Bottom To Top) Typed Large sloped (3mm)
thumb 11x 1x2 Small stud recesses 24 / 24 Center (Top To Bottom) Typed Small (2-2,2mm)

12 - Tubeless - No logo inside - wide center pip (1956-1957)

Photo CatId Mold Members InsideRibStyle StudRecessStyle Associations
thumb 12a Serif pos. numbers - shorter pip width 3 / 22 Across Large sloped (3mm) 12b (Matching patterns - only differs by pip-witdth)
thumb 12b Serif pos. numbers - wider pip width 3 / 22 Across Large sloped (3mm) 12a (Matching patterns - only differs by pip-witdth)
thumb 12c SanSerif pos. numbers - mold 1 3 / 22 Mixed Large (3mm) 12d (Matching patterns)
thumb 12d SanSerif pos. numbers - mold 2 3 / 22 Mixed Large (3mm) 12c (Matching patterns)

21 - Old logo - 3mm stud recess - corner-pip (1958-1959)

Photo CatId Mold Members Associations
thumb 21af 1x2 - Mold #1 Stud logo along 28 / 28 21ag (Matching bottom pattern)
thumb 21ag 1x2 - Mold #1 Stud logo along - rotated 2 / 2 21af (Matching bottom pattern)
thumb 21ah 1x2 - Mold #2 Stud logo along - opposite pip positions 28 / 28 23t (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes)
21ai 1x2 - Mold #3 Stud logo across - without relation to gen 23 48 / 48
21aj 1x2 - Mold #4 Stud logo across - with relation to gen 23 48 / 48 23v (Matching patterns, but with different stud-sizes)

23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)

Photo CatId Mold Members BottomStyle InsideRibStyle MoldPositionLayout MoldPositionStyle PatPendLayout PatPendStyle StudLogoStyle Associations
23aa 1x2 - Mold #7 Pat. pend. ITL 1 / 1 None Across Center (Top To Bottom) Typed Right Normal Wide Round 'O'
23ag 1x2 - Mold #8 Stud logo across - related to 21ai 4 / 4 None Across Center (Top To Bottom) Typed None None Wide Straight 'O'
thumb 23ah 1x2 - Mold #9 stud logo along - no mold numbers 1 / 1 None None None None None None Wide Straight 'O'
23s 2x2 and 2x3 - without pat.pend/mold-id 4 / 8 Tubes Without Cross-support None None None None None Wide Straight 'O'
thumb 23t 1x2 - Mold #1 Stud logo along - evolution from 21ah 28 / 28 None None Center (Top To Bottom) Typed None Normal Wide Straight 'O' 21ah (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes)
thumb 23u 1x2 - Mold #2 Stud logo along - both small and large stud recess 1 / 1 None None Center (Top To Bottom) Typed None Normal Wide Straight 'O' 21ah (Matching patterns, but with different stud-sizes),23t (Matching patterns, but with different stud-sizes)
23v 1x2 - Mold #3 Stud logo across - with relation to gen 21 48 / 48 None None Center (Top To Bottom) Typed None None Wide Straight 'O' 21aj (Matching patterns, but with different stud-sizes)
23w 1x2 - Mold #4 Stud logo across - without relation to gen 21 48 / 48 None None Center (Top To Bottom) Typed None None Wide Straight 'O'
23x 1x2 - Mold #5 Stud logo across - without relation to gen 21 #2 3 / 3 None None Center (Top To Bottom) Typed None None Wide Straight 'O'
23z 1x2 - Mold #6 Stud logo across - unnumbered 2 / 2 None None None None None Normal Wide Round 'O'

31 - Old logo - 1x2 with mold identifiers (1960-1965)

Photo CatId Mold Members Associations
31a 1x2 - A-mold 48 / 48
31b 1x2 - B-mold 5 / 5
31d1 1x2 - D-mold 52 / 52 31d2 (Stud logo (but not pip) rotated 180 deg.)
31d2 1x2 - D-mold rotated 1 / 1 31d1 (Stud logo (but not pip) rotated 180 deg.)
31e1 1x2 - E-mold 52 / 52 31e2 (Rotated 180 deg.)
31e2 1x2 - E-mold rotated 2 / 2 31e1 (Rotated 180 deg.)

Generations Molds MoldMembers
8 40 649

Color

Angle

Motive

image
An unhandled error has occurred. Reload 🗙