Color
NameDescription
PartTypes View itemsPartFamilies View itemsMolds View itemsMold Members View itemsMold Generations View itemsMolds View itemsMemberVariations View itemsBottomStyles View items
Used in both gen 1- and gen 2-bricks.
From1949
RGBebdcb1
To1970
TranslucencyPartTypes View itemsPartFamilies View itemsMolds View itemsMold Members View itemsMold Generations View itemsMolds View itemsMemberVariations View itemsBottomStyles View items
| Photo | Generation | Molds | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01 - Automatic Binding Bricks | 2 | Single Cornered Narrow Bottom Edge | None | None | None | Lengthwise | None | None | None | None | None | None | None |
 |
02 - Large logo - lengthwise ribs | 1 | Single Cornered Narrow Bottom Edge | None | Left To Right | Bold Blockletters | Lengthwise | None | None | None | None | None | None | None |
 |
03 - Large logo - ribs across | 3 | Single Cornered Narrow Bottom Edge | None | Left To Right | Blockletters | Across | None | Top | Hand-written | None | None | None | None |
 |
04 - Dogbone | 1 | Single Cornered Narrow Bottom Edge | None | Top To Bottom | Dogbone | None | None | Left (Bottom To Top) | Typed | None | None | None | None |
| 19 - Other parts - logo on studs | 1 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | Left + Right | Typed | None | None | None | None | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 3 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | None | Right (Top To Bottom) | Hand-written | None | None | Wide Round 'O' | Small (2-2,2mm) | |
 |
25 - Old logo - smaller stud recess - centered pip - no mold-id | 1 | Centered Side Surface | Tubes Without Cross-support | None | None | None | None | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) |
| 31 - Old logo - 1x2 with mold identifiers | 2 | Single Cornered Narrow Bottom Edge | None | None | None | None | Center | Center (Top To Bottom) | Typed | None | None | Wide Round 'O' | Small (2-2,2mm) | |
| 32 - Old logo - 2x2 with mold identifiers | 3 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Left (Top To Bottom) | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) | |
| 33 - Old logo - 2x3 with mold identifiers | 5 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Top+Bottom (right-aligned) | Normal | Wide Round 'O' | Small (2-2,2mm) | |
| 34 - Old logo - 2x4 with mold identifiers | 10 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Small | Wide Straight 'O' | Small (2-2,2mm) | |
 |
41 - Narrow Straight 'O' 1x6 with mold identifiers | 2 | Single Cornered Narrow Bottom Edge | Cross-support | None | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) |
 |
42 - Narrow Straight 'O' 1x8 with mold identifiers | 4 | Centered Side Surface | Cross-support | None | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) |
| 90 - 90-Temp 10x20 | 3 | Bottom | Cross-support | None | None | None | Bottom Right | None | None | None | None | Modern | Large sloped (3mm) |
01 - Automatic Binding Bricks (1949-1951)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
01a | Automatic Binding Bricks | 16 / 16 | 01b (Matching pattern - extra slot added) |
 |
01b | Automatic Binding Bricks (early version) | 1 / 1 | 01a (Matching pattern - extra slot added) |
02 - Large logo - lengthwise ribs (1952-1952)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
02a | Large logo - lengthwise ribs | 16 / 16 |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
03b | Numbered bricks | 17 / 18 | Single Cornered Narrow Bottom Edge | None | Across | None | Top | Hand-written | 03a (Matching surface pattern),03c (Matching pattern (f-1 rotated 180 deg.)),03i (Matching pattern - hand-written number identical) |
 |
03d | With slots | 1 / 8 | Single Cornered Narrow Bottom Edge | None | Spotted | None | Top right corner (Top To Bottom) | Typed | 03f (Matching patterns) |
 |
03g | 10x20 Texture near pip | 1 / 1 | Bottom | Cross-support | None | Bottom Right | None | Typed | 03h (Matching stud-pattern + bottom texture) |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
04a | Overlapping numbers | 1 / 16 |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 19s | Garage Door Counterweight with pin | 4 / 16 |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 23aa | 1x2 - Mold #7 Pat. pend. ITL | 1 / 1 | None | Across | Center (Top To Bottom) | Typed | Right | Normal | ||
| 23ab | 2x4 - obscured mold id | 1 / 1 | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 23y | 2x3 Mirrored handwritten mold pos | 7 / 24 | Tubes Without Cross-support | None | Right (Top To Bottom) | Hand-written | None | None |
25 - Old logo - smaller stud recess - centered pip - no mold-id (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 25a | 2x4 - horizontal stud logo | 11 / 22 |
31 - Old logo - 1x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 31d1 | 1x2 - D-mold | 1 / 52 | ||
| 31e1 | 1x2 - E-mold | 27 / 52 | 31e2 (Rotated 180 deg.) |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | Associations |
|---|---|---|---|---|---|---|
| 32e1 | 2x2 - E-mold 1 - Mold-id top to bottom | 1 / 34 | Left (Top To Bottom) | Right (Top To Bottom) | ||
| 32j | 2x2 - J-mold | 4 / 32 | Right (Bottom To Top) | Left (Bottom To Top) | ||
| 32k | 2x2 - K-mold | 7 / 34 | Right (Bottom To Top) | Left (Bottom To Top) |
33 - Old logo - 2x3 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|
| 33d1 | 2x3 - D-mold 1 (Plain) | 2 / 24 | Left (Bottom To Top) | Typed | 33d2 (Matching pattern - rotated 180 deg) | |
| 33d2 | 2x3 - D-mold 2 (Rotated stud-logo) | 3 / 24 | Left (Bottom To Top) | Typed | 33d1 (Matching pattern - rotated 180 deg) | |
| 33g | 2x3 - G-mold | 4 / 22 | Left (Top To Bottom) | Typed | ||
| 33h1 | 2x3 - H-mold (Plain) | 4 / 22 | Left (Bottom To Top) | Typed | ||
| 33h2 | 2x3 - H-mold (Hand-written) | 1 / 1 | Left (Bottom To Top) | Hand-written |
34 - Old logo - 2x4 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | PipStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 34d1 | 2x4 - D-mold 1 - Small 'Pat. pend.' large 'D' | 3 / 20 | Single Cornered Narrow Bottom Edge | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Small | Wide Straight 'O' | ||
| 34j2 | 2x4 - J-mold 2 | 1 / 3 | Centered Side Surface | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34m | 2x4 - M-mold | 13 / 22 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | None+Hand-written | Normal | Wide Round 'O' | ||
| 34o1 | 2x4 - O-mold 1 | 12 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34o2 | 2x4 - O-mold 2 | 1 / 3 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | ||
| 34t1 | 2x4 - T-mold 1 | 3 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34t2 | 2x4 - T-mold 2 - Rotated 180 deg. | 1 / 1 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34u | 2x4 - U-mold | 4 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Typed | Normal | Wide Round 'O' | ||
| 34v1 | 2x4 - V-mold 1 | 1 / 22 | Single Cornered Narrow Bottom Edge | Right (Bottom To Top) | Left (Bottom To Top) | Typed | Normal | Wide Round 'O' | ||
| 34z1 | 2x4 - Z-mold 1 | 5 / 22 | Centered Side Surface | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' |
41 - Narrow Straight 'O' 1x6 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | Associations |
|---|---|---|---|---|---|
 |
41c1 | Cross support C-mold Corner pip | 10 / 10 | Single Cornered Narrow Bottom Edge | |
 |
41c2 | Cross support C-mold Center pip | 7 / 10 | Centered Side Surface |
42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|
 |
42c2 | 1x8 Cross support C-mold Centered pip Aligned logos | 5 / 10 | None | None | |
 |
42c3 | 1x8 Cross support C-mold Centered pip Rotated logos | 6 / 10 | None | None | |
 |
42d1 | 1x8 Cross support D-mold Stud-logo bottom to top | 7 / 12 | Left | Normal | |
 |
42d2 | 1x8 Cross support D-mold Stud-logo top to bottom | 11 / 12 | Left | Normal |
90 - 90-Temp 10x20 (1962-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
90i | 10x20 Normal logo - X-shape - mold p | 1 / 1 | |
 |
90k | 10x20 Normal logo - X-shape - mold s | 1 / 1 | |
 |
90o | 10x20 Normal logo - X-shape - mold y | 1 / 1 |
| Generations | Molds | MoldMembers |
|---|---|---|
| 14 | 41 | 224 |
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
Color
White
Angle
Motive
