MoldPositionStyle
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01 - Automatic Binding Bricks | 2 | Single Cornered Narrow Bottom Edge | None | None | None | Lengthwise | None | None | None | None | None | None |
 |
02 - Large logo - lengthwise ribs | 1 | Single Cornered Narrow Bottom Edge | None | Left To Right | Bold Blockletters | Lengthwise | None | None | None | None | None | None |
 |
03 - Large logo - ribs across | 2 | Single Cornered Narrow Bottom Edge | None | Left To Right | Blockletters | Across | None | None | None | None | None | None |
 |
04 - Dogbone | 6 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | Across | None | None | None | None | None | None |
 |
05 - Tubeless - Logo inside | 11 | Centered Narrow Bottom Edge | None | Left To Right | Blockletters | Across | None | None | None | None | None | Large (3mm) |
 |
06 - Full stud - with stud logo | 1 | Centered Narrow Bottom Edge | None | None | None | Spotted | None | None | None | None | Wide Straight 'O' | None |
 |
09 - Other parts - no logo | 5 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | None | None | None | None | None | None | None |
 |
11 - Tubeless - No logo inside - corner pip | 5 | Single Cornered Narrow Bottom Edge | None | None | None | Across | None | None | None | None | Wide Straight 'O' | Large sloped (3mm) |
 |
13 - Tubeless - No logo inside - other pips | 2 | Bottom | Cross-support | None | None | None | Bottom Right | None | None | None | Wide Straight 'O' | Large sloped (3mm) |
| 19 - Other parts - logo on studs | 14 | Mixed Narrow Top Edge | Waffles | None | None | None | None | None | None | None | Wide Straight 'O' | Large (3mm) | |
| 21 - Old logo - 3mm stud recess - corner-pip | 2 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | None | None | None | Wide Straight 'O' | Large (3mm) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 5 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
| 32 - Old logo - 2x2 with mold identifiers | 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | None | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) | |
| 45 - Other parts - modern logo | 2 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | None | None | Narrow Straight 'O' | Medium (2,3-2,5mm) | |
| 90 - 90-Temp 10x20 | 22 | Bottom | Cross-support | None | None | None | None | None | None | None | Modern | Large sloped (3mm) |
01 - Automatic Binding Bricks (1949-1951)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
01a | Automatic Binding Bricks | 16 / 16 | 01b (Matching pattern - extra slot added) |
 |
01b | Automatic Binding Bricks (early version) | 1 / 1 | 01a (Matching pattern - extra slot added) |
02 - Large logo - lengthwise ribs (1952-1952)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
02a | Large logo - lengthwise ribs | 16 / 16 |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
03a | Hatched bricks | 18 / 18 | 03b (Matching surface pattern),03c (Matching pattern (f-1 rotated 180 deg.)) |
 |
03c | Hatched bricks - inverted | 2 / 2 | 03b (Matching pattern (f-1 rotated 180 deg.)),03a (Matching pattern (f-1 rotated 180 deg.)) |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
04c | Circles 2x12+2x14 | 4 / 4 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | Across | None | |
 |
04d | Circles - 2x2 | 4 / 4 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | Across | None | |
 |
04e | Circles 4x4 Slotted | 6 / 6 | Single Cornered Narrow Bottom Edge | None | Diagonal | Dogbone | Across | None | 04f (Matching top+bottom) |
 |
04f | Circles 4x4 Slots removed | 6 / 6 | Single Cornered Narrow Bottom Edge | None | Diagonal | Dogbone | Across | None | 04e (Matching top+bottom) |
 |
04i | 1x2 Mystery Bricks #1 | 3 / 3 | Centered Narrow Bottom Edge | None | None | None | None | None | |
 |
04j | 10x20 | 2 / 2 | Bottom | Cross-support | Left To Right | Dogbone | None | Bottom Right |
05 - Tubeless - Logo inside (1955-1956)
| Photo | CatId | Mold | Members | PipStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
05a | Small Blockletter - No logo on studs - first iteration | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05b (Stud ring patterns),05c (Stud ring patterns) |
 |
05b | Small Blockletter - No logo on studs - second iteration | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05a (Stud ring patterns),05c (Stud ring patterns) |
 |
05c | Small blockletter - No logo | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05a (Stud ring patterns),05b (Stud ring patterns) |
 |
05d | Small blockletter - Mixed stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Both | Wide Straight 'O' | Large (3mm) | |
 |
05e | Small blockletter - Mixed stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | Large (3mm) | |
 |
05f | Small blockletter - With stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | Large (3mm) | |
 |
05g | Small blockletter - With stud logo | 9 / 9 | Centered Wide Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | None | |
 |
05h | Small blockletter - No slotted bricks | 9 / 9 | Centered Wide Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | None | |
 |
05x | Early prototype mold - no logo[mystery bricks] | 1 / 1 | Centered Medium Bottom Edge | None | None | Across | Wide Straight 'O' | Large (3mm) | |
 |
05y | Early prototype mold - no stud recesses[mystery bricks] | 2 / 2 | Centered Medium Bottom Edge | Left To Right | Blockletters | Across | Wide Straight 'O' | None | |
 |
05z | Wide logo | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | Across | Wide Straight 'O' | Large (3mm) |
06 - Full stud - with stud logo (1955-1956)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
06k | 1x2 no slots - pip short side | 1 / 1 | 06j (Slot removed) |
09 - Other parts - no logo (1955-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
09A | Waffle plates without stud recess | 20 / 20 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | |
 |
09c | Garage Floor Plate without stud logo | 1 / 1 | Bottom | None | Left To Right | Dogbone | |
 |
09d | Garage Door Frame without studs - full rib for slotted bricks | 1 / 1 | Mixed Cornered Narrow Bottom Edge | None | None | None | |
 |
09e | Garage Door Frame without studs - winged rib for slotted bricks | 1 / 1 | Mixed Cornered Narrow Bottom Edge | None | None | None | |
 |
09f | Garage Door - for winged frames | 1 / 1 | None | None | Left To Right | Dogbone |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
11c | Unnumbered - sloped stud recesses | 22 / 22 | Single Cornered Narrow Bottom Edge | Across | Large sloped (3mm) | |
 |
11u | 2x4 Without ribs - single pip, bolder stud font | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Large (3mm) | |
 |
11v | 2x4 Without ribs - double pip | 3 / 3 | Double Cornered Narrow Bottom Edge | None | Large (3mm) | |
 |
11w | 2x4 Unnumbered - normal recess | 5 / 5 | Single Cornered Narrow Bottom Edge | Across | Large (3mm) | |
 |
11z | 2x4 Without ribs - single pip, normal stud font | 14 / 14 | Single Cornered Narrow Bottom Edge | None | Large (3mm) |
13 - Tubeless - No logo inside - other pips (1956-1957)
| Photo | CatId | Mold | Members | BottomStyle | Associations |
|---|---|---|---|---|---|
 |
13b | 10x20 - All studs have recesses | 1 / 1 | Cross-support | |
 |
13c | 10x20 - Four studs without recesses | 2 / 2 | None |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | MoldIdentificationLayout | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
19E | Waffle plates with stud recess, no logo underneath, 2x8 have 16 stud recesses | 1 / 1 | Mixed Narrow Top Edge | Waffles | None | None | None | Wide Straight 'O' | Large (3mm) | |
 |
19f | Garage Floor Plate with stud logo - no mold id | 2 / 2 | Bottom | None | Left To Right | Dogbone | None | Narrow Straight 'O' | None | |
 |
19g | Garage Floor Plate with stud logo - mold "2" | 1 / 1 | None | None | Left To Right | Dogbone | Center | Narrow Straight 'O' | None | |
 |
19h | Garage Floor Plate with stud logo - mold "C" | 1 / 1 | Bottom | None | Left To Right | Dogbone | Center | Narrow Straight 'O' | None | |
 |
19i | Garage Floor Plate with stud logo - mold "D" | 1 / 1 | Bottom | None | Left To Right | Dogbone | Center | Modern | None | |
 |
19j | Garage Floor Plate with stud logo - mold "E" | 1 / 1 | Bottom | None | Left To Right | Dogbone | Center | Modern | None | |
 |
19k | Garage Floor Plate with stud logo - mold "F" | 1 / 1 | Bottom | None | Left To Right | Dogbone | Center | Modern | None | |
 |
19l | Garage Floor Plate with stud recess - smooth bottom surface | 1 / 1 | Bottom | None | Left To Right | Dogbone | None | Modern | Medium (2,3-2,5mm) | |
 |
19m | Garage Floor Plate with stud recess - small circles on bottom surface | 1 / 1 | Bottom | None | Left To Right | Dogbone | None | Modern | Medium (2,3-2,5mm) | |
 |
19o | Garage Door Frame with studs - tall wide straight 'O' | 2 / 2 | Centered Narrow Bottom Edge | None | None | None | None | Wide Straight 'O' | None | |
 |
19p | Garage Door Frame with studs - narrow straight 'O' - partly sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | Narrow Straight 'O' | None | |
 |
19q | Garage Door Frame with studs - narrow straight 'O' - fully sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | Narrow Straight 'O' | None | |
 |
19r | Garage Door without hinge pins | 4 / 4 | Mixed Narrow Top Edge | None | Left To Right | Dogbone | None | None | None | |
| 19u | Garage Door with hinge pins without mold pos | 2 / 2 | Mixed Narrow Top Edge | None | Left To Right | Dogbone | None | None | None |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
21ak | 1x6 Cross support Large Hole Unnumbered | 20 / 20 | |
 |
21am | 1x8 Cross support Large stud recess Unnumbered | 18 / 18 |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
 |
23ac | 1x6 Cross support Small Hole Unnumbered | 9 / 9 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | Wide Straight 'O' | |
 |
23ad | 1x6 Cross support Small Hole Numbered Bold | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | Wide Straight 'O' | |
 |
23ah | 1x2 - Mold #9 stud logo along - no mold numbers | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | None | Wide Straight 'O' | |
| 23s | 2x2 and 2x3 - without pat.pend/mold-id | 8 / 8 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | Wide Straight 'O' | ||
| 23z | 1x2 - Mold #6 Stud logo across - unnumbered | 2 / 2 | Single Cornered Narrow Bottom Edge | None | None | Normal | Wide Round 'O' |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 32e3 | 2x2 - E-mold 3 - No mold pos | 1 / 1 |
45 - Other parts - modern logo (1960-1990)
| Photo | CatId | Mold | Members | StudLogoStyle | Associations |
|---|---|---|---|---|---|
 |
45A | Samsonite waffle plates - narrow straight logo | 1 / 1 | Narrow Straight 'O' | |
 |
45B | Samsonite waffle plates - modern logo | 5 / 5 | Modern |
90 - 90-Temp 10x20 (1962-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
90a | 10x20 Normal logo - no X-shape - all studs have recess - no "700e" | 1 / 1 | None | Modern | Large sloped (3mm) | |
 |
90b | 10x20 Narrow straight 'O' logo - no X-shape - no mold identifier - dot pattern underneath | 1 / 1 | Bottom Right | Narrow Straight 'O' | Large sloped (3mm) | |
 |
90b2 | 10x20 Normal logo - no X-shape - small circles-pattern underneath | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90c | 10x20 Narrow straight 'O' logo - no X-shape - mold c | 1 / 1 | Bottom Right | Narrow Straight 'O' | Large sloped (3mm) | |
 |
90c2 | 10x20 Narrow straight 'O' logo - no X-shape - mold ab | 1 / 1 | Bottom Right | Narrow Straight 'O' | Large sloped (3mm) | |
 |
90c3 | 10x20 Narrow straight 'O' logo - no X-shape - mold Gb | 1 / 1 | Bottom Right | Narrow Straight 'O' | Large sloped (3mm) | |
 |
90d | 10x20 Normal logo - no X-shape - mold f | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90e | 10x20 Normal logo - no X-shape - mold I | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90f | 10x20 Normal logo - X-shape - mold l | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90g | 10x20 Normal logo - X-shape - mold m | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90h | 10x20 Normal logo - X-shape - mold n | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90i | 10x20 Normal logo - X-shape - mold p | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90j | 10x20 Normal logo - X-shape - mold r | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90k | 10x20 Normal logo - X-shape - mold s | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90l | 10x20 Normal logo - X-shape - mold t | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90m | 10x20 Normal logo - X-shape - mold v | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90n | 10x20 Normal logo - X-shape - mold x | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90o | 10x20 Normal logo - X-shape - mold y | 1 / 1 | Bottom Right | Modern | Large sloped (3mm) | |
 |
90p | 10x20 Normal logo - X-shape - mold Æ | 1 / 1 | Bottom Right | Modern | Large (3mm) | |
 |
90q | 10x20 Normal logo - X-shape - mold Ø | 1 / 1 | Bottom Right | Modern | Large (3mm) | |
 |
90r | 10x20 Normal logo - X-shape - mold B | 1 / 1 | Bottom Right | Modern | Large (3mm) | |
 |
90s | 10x10 Normal logo - X-shape - cross support - mold A | 1 / 1 | Bottom Right | Modern | Large (3mm) |
| Generations | Molds | MoldMembers |
|---|---|---|
| 15 | 81 | 354 |